These are instructions on how to jailbreak your iPhone 4 on the 4.3.1 firmware using RedSn0w.

Make sure not to update to iOS 4.3.1 if you need an unlock as one is not yet available!

Step 1 – Create a folder on your desktop called Pwnage
Download RedSn0w from here and place it in the Pwnage folder. Likewise, download the latest 4.3.1 firmware from below and place it in the same folder.

4.3.1 (4 GSM): iPhone3,1_4.3.1_8G4_Restore.ipsw

Extract the RedSn0w zip file into the same folder.

Step 2 – Connect your iPhone to the computer and launch iTunes.
Select your iPhone from the list of devices on the left. Now hold down Shift and click the Restore button. Restore is preferred as it won’t create any wasted space on your iPhone.

Navigate to the Pwnage folder on your desktop and select the 4.3.1 firmware ipsw. Click the Choose button to continue.

Step 3 – Once iTunes has finished updating your iPhone to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.

Step 4 – Once RedSn0w opens click the Browse button

Step 5 – Select the 4.3.1 firmware ipsw we placed in the Pwnage folder on our desktop then click Open.

Step 6 – Once the firmware has been verified click the Next button to continue.

Step 7 – RedSn0w will now prepare the jailbreak data

Step 8 – From this window you can select the jailbreak options you would like.

Make sure Cydia is selected and click the Next button to continue.

Step 9 – Please plug your iPhone into the computer and make sure its OFF then click the Next button

Step 10 – RedSn0w will now guide you through the steps to get into DFU mode.

Hold down both the Home button and the Power button for 10 seconds.

Release the Power button and continue holding the Home button until RedSn0w detects the device.

Step 11 – Your iPhone will now reboot

Step 12 – RedSn0w will then begin uploading the new RAM Disk and Kernel.

Step 13 – Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPhone finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard.

*As usual a big thanks to the iPhone Dev-Team and I0n1c for their hard work and contribution to the iPhone community.
**Windows 7 users may want to try running the redsn0w executable mode as an administrator in Windows Vista compatibility mode if you experience any trouble.

Ever wanted to take a photo but it’s an awkward or inconvenient time to pull out the camera?

Now you can act like you’re on the phone while secretly and automatically snapping pictures!

Useful for many situations, including:
? Spotting a celebrity but don’t want to be “that guy” pulling out the camera phone
? “Blackmailing” your friends
? Seeing a potential date for your friend and want to take a photo
? You just don’t want people to see you’re taking a photo
? Many other situations…

Just hold your iPhone up to your ear and act like you’re on the phone, and SneakyCamera will take a photo every few seconds. No one except you will know what’s really happening!

===== DISCLAIMERS =====
- This app is meant to be used for fun, legal purposes and NOT for doing anything lacking in common sense or getting into legal trouble.
- Obvious, but nevertheless: SneakyCamera only works on devices with a camera (all iPhones, iPod Touch 4th generation).
- This app is intended for entertainment purposes only and does not provide true call making functionality.

Download

Draw on STEAM… for FREE!!!

…it’s like drawing on your mirror!!!

… and it’s FREE!

Download

These are instructions on how to jailbreak your iPhone 3GS on the 4.3.1 firmware using RedSn0w for Windows.

Make sure not to update to iOS 4.3.1 if you need an unlock as one is not yet available unless you opt to use the iPad baseband.

IMPORTANT FOR UNLOCKERS
During this process you can update your baseband to the 06.15 version. If you are on 05.14 or 05.15 or higher you will need to do this to unlock. You do not need to do this for jailbreak only. Please read the following very carefully before deciding whether to do this.

1. There is no way to come back down from 06.15, and there’s no hiding the baseband version from Apple. You’ll be voiding your warranty in a very obvious way.
2. If some future baseband comes out with a critical fix, you won’t be able to update to it if it remains down in the 05.xx sequence (then again, you wouldn’t update to it if you wanted to keep your unlock anyway).
3. Starting with FW 4.2.1 if you have 06.15 on your iPhone you won’t ever be able to restore to stock firmware (it will fail). You’ll need to only restore to custom IPSWs (then again, if you’re unlocker you should already be doing that).
4. There are reports that 06.15 may disable your GPS. The iPhone Dev-Team is currently working on a fix.

Don’t update to 06.15 if you don’t need to! Only do this if you need the unlock and you’re stuck on 05.14 or 05.15, and you’re willing to assume the above risks. If your baseband is already unlockable and you are on a lower firmware version then use PwnageTool to update to 4.3.1 without upgrading your baseband.

Step 1 – Create a folder on your desktop called Pwnage

Download RedSn0w from here and place it in the Pwnage folder. Likewise, download the latest 4.3.1 firmware from below and place it in the same folder.

4.3.1 (3GS): iPhone2,1_4.3.1_8G4_Restore.ipsw

Extract the RedSn0w zip file into the same folder.

Step 2 -Connect your iPhone to the computer and launch iTunes.

Select your iPhone from the list of devices on the left. Now hold down Shift and click the Restore button. Restore is preferred as it won’t create any wasted space on your iPhone.

Navigate to the Pwnage folder on your desktop and select the 4.3.1 firmware ipsw. Click the Choose button to continue.

Step 3 -Once iTunes has finished updating your iPhone to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.

Step 4 -Once RedSn0w opens click the Browse button

Step 5 -Select the 4.3.1 firmware ipsw we placed in the Pwnage folder on our desktop then click Open.

You will be asked if this device is a newer fixed model. If yours is then click the Yes button; otherwise, click the No button.

Step 6 -Once the firmware has been verified click the Next button to continue.

Step 7 -RedSn0w will now prepare the jailbreak data

Step 8 -From this window you can select the jailbreak options you would like.

Verbose boot displays detailed information on boot of your device and is generally only needed by developers and advanced users.

Make sure Cydia is selected. For this tutorial we will also select Custom boot logo and Custom recovery logo.

When you click to select each custom logo option a dialog window will appear asking you to select the image. Locate the image you would like to use then press the Open button.

*Remember the rules for boot logos are: RGB or Grayscale format with Alpha channel and dimension below 320×480.

If you read the warning above and you would like to update your baseband to the 06.15 iPad version for unlock then check Install iPad Baseband. Click Yes when prompted to confirm your decision.

Click the Next button to continue

Step 9 -Please plug your iPhone into the computer and make sure its OFF then click the Next button

Step 10 -RedSn0w will now guide you through the steps to get into DFU mode.

Hold down both the Home button and the Power button for 10 seconds.

Release the Power button and continue holding the Home button until RedSn0w detects the device.

Step 11 -Your iPhone will now reboot

Step 12 -RedSn0w will then begin uploading the new RAM Disk and Kernel.

Step 13 -Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPhone finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard.

*As usual a big thanks to the iPhone Dev-Team and I0n1c for their hard work and contribution to the iPhone community.
**Windows 7 users can try running RedSn0w as an administrator in Windows Vista or XP compatibility mode if you experience any difficulties.

Fasten your seatbelt, you’re in for an exhilarating ride with the new Rollercoaster Extreme game. Brought to you by Barclaycard, makers of the top-rated Waterslide Extreme app. Rollercoaster Extreme sees you riding the rails of eight individual rollercoaster tracks in the suburbs of New York City. Race the clock and unlock new areas in Chinatown, Central Park, Upper West Side and Downtown New York.

The faster you go, the higher your score. Tilt your iPhone left and right to dodge obstacles and grab energisers for extra speed boosts around the track. Look out for diversions that test your rider skills and collect all our badges at each level to prove that you’re a real extreme rollercoaster rider. It’s harder than you think.

Key features
- Race around a 3D New York City
- Unlock new areas in the game
- Interact with the game environment on every ride
- Tilt the screen to dodge obstacles or grab speed boosting energisers
- Collect special Rollercoaster Extreme rider badges at every level

Download